Icom IC-7300

Icom IC-7300 saw its debut at the Tokyo Hamfair August 2015 and was the star of the Dayton Hamvention™ May 2016. This new HF plus 6 meter 100 watt transceiver hosts new capabilities and technologies for its class. Receive coverage is 30 kHz to 74.8 MHz. Transmit is: 1.8–1.999, 3.5–3.999, 5.255–5.405*, 7–7.3, 10–10.15, 14–14.35, 18.068–18.168, 21–21.45, 24.89–24.99, 28–29.7 and 50–54 MHz. Instead of the conventional superheterodyne system, a direct RF samplingapproach is used. The brilliant TFT touch screen provides complete operational status including a stunning real-time spectrum display with waterfall plus a useful audio scope display

Icom IC-7300

There is a built-in tuner. Other features include: Voice memory, 15 Band Pass Filters, CW/RTTY memory keyer functions, RTTY decode, SD card slot, USB for CI-V and audio I/O, digital noise reduction and 101 memories. Only 9.45 x 3.75 x 9.37 inches (240x95x238mm). Supplied with HM-219 hand mic, printed Basic Manual, CD with Basic and Full Manual, DC power cord plus plugs and spare fuses. *60 meter channels in memory.

Type: Amateur HF/VHF transceiver
Frequency range: HF / 6 m (also 4 m for european version)
Tuning steps: Down to 1 Hz
Mode: AM/FM/SSB/CW/RTTY
Channels/memory management: 99 regular
2 scan edge
Repeater shift/offset: ±? KHz
Power supply: 13.8 VDC ±15%
Current drain/power consumption: RX: 0.9-1.25 A
TX: Max 21 A
Antenna impedance/connector: 50 ohms (16.7-150 ohms with tuner) / SO-239
Dimensions (W*H*D): 240*94*238 mm (9.45*3.7*9.4″)
Weight: 4.2 Kg (9.3 lbs)
Other features: 4.3″ touch-TFT. CTCSS/PL. High performance real-time band scope.
Built-in ATU and keyer. USB-connector for audio in/out and CI-V.
RTTY-decoder.
RECEIVER SECTION
Receiver system: Direct sampling superheterodyne
IF: 36 KHz
Sensitivity: AM (10 dB S/N)
0.5-1.8 MHz: 12.6 uV
1.8-30 MHz: 2 uV
30-1000 MHz: 1.4 uV
6 m: 1 uV
4 m: 1 uV (European version only)
FM (12 dB SINAD)
28-29.7 MHz: 0.5 uV
6 m: 0.25 uV
4 m: 0.25 uV (European version only)
SSB/CW (10 dB S/N)
1.8-30 MHz: 0.16 uV
6 m: 0.13 uV
4 m: 0.16 uV (European version only)
Selectivity: AM (Filter: Sharp, BW: 6 KHz)
6 KHz (-6 dB), 10 KHz (-40 dB)
FM (Filter: Sharp, BW: 15 KHz)
12 KHz (-6 dB), 22 KHz (-40 dB)
SSB (Filter: Sharp, BW: 2.4 KHz)
2.4 KHz (-6 dB), 3.4 KHz (-40 dB)
CW (Filter: Sharp, BW: 500 Hz)
500 Hz (-6 dB), 700 Hz (-40 dB)
RTTY (Filter: Sharp, BW: 500 Hz)
500 Hz (-6 dB), 800 Hz (-40 dB)
Image rejection: 70 dB (except for ADC aliasing)
AF output power/speaker: 2.5 W at 10% distortion / 8 ohms
External speaker connector: 3.5 mm
TRANSMITTER SECTION
RF output power: AM (HF/6 m):1-25 WFM/SSB/CW/RTTY (HF/6 m):2-100 WAM (4 m):1-12.5 W (European version only)FM/SSB/CW/RTTY (4 m):2-50 W (European version only)
Modulation system: AM: Low power modulation
FM: Reactance nodulation
SSB: PSN modulation
Max FM deviation: ±? KHz
Spurious emissions: HF: Less than -40 dB
6 m: Less than -60 dB
70 MHz: Less than -60 dB
Microphone impedance/connector: 600 ohms / 8-pin
MISCELLANEOUS
Manufactured: Japan, 2016-201x
Additional info: New price 2016 in Sweden: 14495:- SEK
Related documents: Basic user manual (13.6 MB)
Modifications:
Options/Accessories: SP-38External speaker, 5 W, 8 ohms

Yer işareti koy Kalıcı Bağlantı.

Bir cevap yazın

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir